[MW:17213] IGC practice 'A' and 'E

Dear,

Pl find nice PPT for details.

regards,

mohd.

On Saturday, March 16, 2013 3:02:22 PM UTC+3, Tiger wrote:

Dear Experts,

what's your opinion about attached image for (1/2 inch #1500 globe valve) which the stem nut attached to the bonnet with tack weld and as i know it's not acceptable to make a tack weld in valve body. could you give your opinion based on standards ASAP.

the manufacture code for this valve is API 602.

Regards 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.