in addition to standard and specific practices of hydrostatic pressure testing, either drain or high point vent points valves (LPT, HPT) shall also be tested as per drain/vent valve specification and API standard applicable (like API 6D +) and it should be clearly mentioned in METHOD STATEMENT of HT. (1.5 times of design pressure / MAWP as required)
it may vary as per location, (on/offshore), length of vent / drain point from tapping, closed drain, material spec
chandrakant mohikar
On Thu, Mar 28, 2013 at 6:07 AM, Jawed Anwar <jawed81@gmail.com> wrote:
DEAR EXPERTSi have one query that during hyedro test where should be the pressure guage show the high pressure value at high point vent or low point drain ,and why ?--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment