[MW:17165] Re: Welding of Weldox 700 plate with backing

Mr Tugrul,

 

i think you may try ER100 SG for root and ER110 SG for upper layer.

18 Mart 2013 Pazartesi 14:22:25 UTC+2 tarihinde tugrulhan özdemir yazdı:

Dear  welding peole

 

 

We had Weldox 700 plate with 6 mm thickness, using GMAW method with backing.

 

First we made:    2  passes  with ER110SG   (1.2 dia wire) with backing : failed ( root bending)

Second         :     3 passes  with ER110SG (1.2 dia wire) with backing  and pre heating(25 C) : failed (root bending)

 

We will try for the 3rd time.  I am planing to use :

 

ER100SG (1 mm  dia wire)  with backing ------------ root run

ER110SG (1mm dia wire) with backing    ------------ all other  

we will apply preheat also (around 25 C)

 

 

Is there anyone has experience about 6mm weldox 700 with backing. Do you have any PQR and WPS ?

 

 

Regards

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.