Dear Sirs,
1) Is Mild Steel Pipe equal to Carbon Steel Pipe
2) When we say Carbon Steel Pipe where does this gets classified into a) High Carbon Steel Pipe or b) Low Carbon Steel Pipe.
Please advice.
Best Regards,
Santosh Karnire
Purchase Engineer
P.O. Box 4988, Fujairah, United Arab Emirates. www.permapipe.ae
Tel : +971 9 2282540 Ext: 139 | Fax : +971 9 2282541
Cell : +971 55 6471359 | Email : skarnire@permapipe.ae
**** Setting the international standard for Pre-insulated Pipe for the District Cooling and Oil & Gas Industries.
This message, including any attachments, may contain confidential information & may also be legally privileged. The information contained in this e-mail message is intended only for the use of the rightful & intended addressee & must not be disclosed to any third party without express permission. If you are not the intended recipient, you are hereby notified that any distribution, copying, review, retransmission, dissemination or other use of this electronic transmission or the information contained in it is strictly prohibited. If this email is received in error, no confidentiality or privilege is waived or lost. Please notify the sender or email contactus@permapipe.ae & delete the email you have received from your system & destroy any hard copy.
From: Muhammad Naveed Sabir [mailto:naveed.sabir2010@gmail.com]
Sent: Wednesday, January 05, 2011 12:11 PM
To: materials-welding@googlegroups.com
Subject: Re: [MW:9088] Definition for CARBON STEEL and LOW ALLOY CARBON STEEL.
Low-alloy steel
Low alloy steels are usually used to achieve better harden ability, which in turn improves its other mechanical properties. They are also used to increase corrosion resistance in certain environmental conditions.With medium to high carbon levels, low alloy steel is difficult to weld. Lowering the carbon content to the range of 0.10% to 0.30%, along with some reduction in alloying elements, increases the weld ability and form ability of the steel while maintaining its strength. Such a metal is classed as a high strength low alloy steel.
Alloying elements are added to achieve certain properties in the material. As a guideline, alloying elements are added in lower percentages (less than 5%) to increase strength or harden ability, or in larger percentages (over 5%) to achieve special properties, such as corrosion resistance or extreme temperature stability.
Manganese, silicon, or aluminum are added during the steel making process to remove dissolved oxygen from the melt. This understates the case because manganese also serves to remove sulfur and phosphorous from the molten steel.
Manganese, silicon, nickel, and copper are added to increase strength by forming solid solutions in ferrite. Chromium, vanadium, molybdenum, and tungsten increase strength by forming second-phase carbides. Nickel and copper improve corrosion resistance in small quantities. Molybdenum helps to resist embitterment. Zirconium, cerium, and calcium increase toughness by controlling the shape of inclusions.meganese sulphide, lead, bismuth, selenium, and tellurium increase Mach inability.
Carbon steel
Carbon steel, also called plain-carbon steel is steel where the main alloying constituent is carbon. The (AISI) defines carbon steel as: "Steel is considered to be carbon steel when no minimum content is specified or required for chromium, cobalt, columbium, molybdenum, nickel, tit, Tungsten, vanadium or zirconium, or any other element to be added to obtain a desired alloying effect; when the specified minimum for copper does not exceed 0.40 percent; or when the maximum content specified for any of the following elements does not exceed the percentages noted: manganese 1.65, silicon 0.60,copper 0.60.
Thanks & Best Regards
Muhammad Naveed Sabir
QA/QC Inspector Mechanical
Moody International pvt Ltd.
cell:+92-307-7005422
On Wed, Jan 5, 2011 at 9:25 AM, Barry Gideon <barry@arv-offshore.com> wrote:
Can anyone advise me where I can find the definition for CARBON STEEL and LOW ALLOY CARBON STEEL (Preferably an explicit definition by ASTM and the relevant standard number/description).
Form a web search I have found the following definitions :
AISI defines carbon steel as follows: Steel is considered to be carbon steel when no minimum content is specified or required for chromium, cobalt, columbium [niobium], molybdenum, nickel, titanium, tungsten, vanadium or zirconium, or any other element to be added to obtain a desired alloying effect; when the specified minimum for copper does not exceed 0.40 per cent; or when the maximum content specified for any of the following elements does not exceed the percentages noted: manganese 1.65, silicon 0.60, copper 0.60.
Alloy or alloyed steels are defined by the ISO specification 4948/1 in the following manner. Alloy steels are those containing any element listed below in a quantity equal to or greater than the quantity for that listed element: aluminium 0.10%, boron 0.008%, bismuth 0.10%, chromium 0.30%, cobalt 0.10%, cupper 0.40%, manganese 1.65%, molybdenum 0.06%, lead 0.40%, selenium 0.10%, silicon 0.50%, tellurium 0.10%, titanium 0.05%, tungsten 0.10%, vanadium 0.10%, zirconium 0.05%, Lanthanides (each) 0.05%, other specified elements (except carbon, sulphur, phosphorus, nitrogen) 0.05% [Ref 1].
Various attempts have been made to distinguish ‘low’ and ‘high’ alloy carbon steels, but the definitions vary between countries and between standard-setting organisations. As a general indication, low alloy steel can be regarded as alloy steels (by the ISO definition) containing between 1% and less than 5% of elements deliberately added for the purpose of modifying properties.
However, AISI defines low alloy steels as a constitute to a category of ferrous materials that exhibit mechanical properties superior to plain carbon steels as the result of additions of alloying elements such as nickel, chromium, and molybdenum. Total alloy content can range from 2.07% up to levels just below that of stainless steels, which contain a minimum of 10% chromium.
Regards
Barry Gideon
ARV Offshore Co., Ltd.
555 Rasa Tower 2, 18th Floor
Phaholyothin Road, Jatujak, Bangkok 10900
THAILAND
Tel: + 66 (0) 2937 1211
Fax: + 66 (0) 2937 1212
Mobile: + 66 (0) 8 4705 0588
Skype: Barry_Gideon
P Save a tree...please don't print this e-mail unless you really need to
“The information contained in or attached to this e-mail is confidential and may be subject to legal or professional privilege. This e-mail is intended to be reviewed only by the individual to whom it is addressed, as named above. If you are not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any review, dissemination or copying of this e-mail and its attachments, if any, or the information contained herein is prohibited. If you have received this e-mail in error, please immediately notify the sender by return e-mail and delete this e-mail and any attachments permanently from your system. Thank you.”
Any business communication, sent by or on behalf of ARV Offshore Co Ltd, ARV Holdings Pte Ltd or one of its affiliated firms or other entities (together "ARV"), is confidential and may be privileged or otherwise protected. If you receive it in error please inform us and then delete it from your system. You should not copy it or disclose its contents to anyone. Messages sent to and from ARV may be monitored to ensure compliance with internal policies and to protect our business. Emails are not secure and cannot be guaranteed to be error free. Anyone who communicates with us by email is taken to accept these risks.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment