From: John Du Plessis <duplessisj@saiw.co.za>
To: materials-welding@googlegroups.com
Sent: Fri, October 1, 2010 8:40:34 AM
Subject: [MW:7298] RE: 7290] Electrode for cast steel
Larry
One treats cast steel similar to wrought steel. Match the strength of the cast steel with the strength of the electrode. Depending on carbon equivalent pre and post weld heating might apply.
If you have the grade of material I can be more specific.
John du Plessis
Technology Manager
Tel: +27 (11) 298 2100
Tel: +27 (11) 298 2103 (Direct)
Fax: +27 (11) 836 6014
Mobile:+27 82 883 4970
This email and any files transmitted with it are confidential and may be legally privileged. They are intended solely for the use of the individual or entity to whom they are addressed. Access to this e-mail by anyone else is unauthorised, and any disclosure, copying, distribution or other use of this e-mail is prohibited and may be unlawful. We will not under any circumstances have any responsibility or liability arising out of or in connection with any unauthorised use of this e-mail. If you have received this email in error please notify the sender before deleting it.
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Larry
Sent: 01 October 2010 04:23 AM
To: materials-welding@googlegroups.com
Subject: [MW:7290] Electrode for cast steel
Hi,
Can anybody suggest a good electrode for cast steel?
No code applies, just common welding.
Thanks in advance.
Cheers,
Larry
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment