Yes, u can use the same WPS. you can not use ,only when there is a change in essential variables or if u have impacts in your job
--- On Sat, 18/9/10, Vanchinath S.A. <vanchinaths@gmail.com> wrote: From: Vanchinath S.A. <vanchinaths@gmail.com> Subject: Re: [MW:7081] WELDING OF SA 240 GR 321 To: materials-welding@googlegroups.com Date: Saturday, 18 September, 2010, 9:32 PM
yes On Fri, Sep 17, 2010 at 3:05 PM, manoj john <manojacgnr@gmail.com> wrote: Dear All, I have qualified following WPS: Material : SA 240 GR 304 Filler metal : E 308 and ER 308 Welding process : GTAW and SMAW Can I weld SA 240 GR 321 to SA 240 GR 321 material using above WPS. All variables are same including thickness range only change is fillelr metal, instead of ER 308 and E 308 it will be ER 347 and E 347 respectively. Thank you all in advance Best Regards. Manoj -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment