Lamination, slag, blowholes, scabs, overlaps, cracks, pits- all derivable from the original casting in general + due to improper rolling process conditions
--- On Mon, 6/9/10, Kisan Gamane <kisankrishna1506@gmail.com> wrote: From: Kisan Gamane <kisankrishna1506@gmail.com> Subject: [MW:6884] ultrasonic testing in raw material To: materials-welding@googlegroups.com Date: Monday, 6 September, 2010, 9:24 AM
Dear all Anybody can suggest for following request. Which types defect may probabaly occurs in rolling plate. so that I can able to select the probe type ( Normal or Angle) for ultrasonic testing in raw material
--
Kisan Gamane ॐ सर्वे भवन्तु सुखिनः, सर्वे सन्तु निरामयः सर्वे भद्राणि पश्यन्तु, मा कश्चिद दुखभाग भवेत्. May all be happy. May all enjoy health and freedom from disease. May all have prosperity and good luck. May none suffer or fall on evil days. ++++ -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment