Regards
VJv
On Mar 6, 4:28 pm, Rituraj Bose <boser2...@gmail.com> wrote:
> Hi VJV,
> As per Para 345.2.3 (c) of ASME B31.3 (2006 edn.), you can either do
> 100% RT or 100% UT. If Project Specification asks for, you may have to
> do PT or MT after root pass as per Para 344.7, if nothing mentioned in
> Project Specifications, you can go ahead only for 100% RT and you are
> right that no additional requirement is there in B31.3.
> Regards,
> R. Bose
>
> On Mar 5, 10:56 pm, VJ V <veeve...@gmail.com> wrote:
>
>
>
> > Hi All,
>
> > There are a couple of Tie-in/Closure joints to be welded in the
> > project, I am involved right now. No possibility of Leak test/
> > Hydrotest for that joint..
>
> > Project spec is ASME B31.3(100% RT),and
> > I would like to know is there any requirement of UT and cut bevel MT/
> > UT,additional to RT specified by the Code for Closure/ Tie in joints.
>
> > I couldn't see that requirement(cut bevel MT,UT) in B 31.3......Am I
> > right ?
>
> > I have done earlier UT,cut bevel MT additional to RT in other
> > projects,but that was as per project spec.
>
> > Thanks- Hide quoted text -
>
> - Show quoted text -
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---
Comments