Sunday, March 8, 2009

[MW:1731] Re: Heat input during welding

Hi Sandy,
Any heat input has the same effect notwithstanding the WP. Sec IX allows +/- 15% deviation from the PQR established values.
Best regards,
Shashank Vagal

--- On Sun, 8/3/09, sandy kumar <sandy001987@gmail.com> wrote:

From: sandy kumar <sandy001987@gmail.com>
Subject: [MW:1721] Heat input during welding
To: materials-welding@googlegroups.com
Date: Sunday, 8 March, 2009, 1:17 PM

By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...