Re: [MW:5221] A860WPHY

Dear Rajpal,

Could u pl mention the code which u r following.

Sent from my iPhone

On 22-May-2010, at 3:57 PM, Rajpal Dhillon <rajpal.bantaa@gmail.com> wrote:

Dear Members,

We are to weld the A860 WPHY 65 Flow Tee to A333 Gr6 pipe.Our TPIA is asking for a separate PQR for this.We already have a PQR fpr A333 Gr6. Our main concern is if        we onduct a PQR fpr A860WPHY TO A333Gr6 we will loose one Flow Tee which we have imported from ITALY.To get a new Floe tee it will take minimum three months which we can not afford at this point of time. Is there any way out.

 

 

Rajpal Singh Dhillon

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.