Dear
PH & PPM
1 . C. S - less then 250ppm or specified by client spec.
2. S.S- 50 ppm Or specified by client spec.
3. PH - 07 natural water 6.5-7.5 best
Lesser PH value more acidic below 06 Or equivalent 06 for stainless steels, it's better to refer client specifications for PH value
Tejas
On Fri, 6 Nov, 2020, 9:03 AM Nandush Sreekumar, <nandush.s@mkgoman.com> wrote:
what is the Commonly Recommend ph & Chloride Value for hydro test Water For Cs & SS Materials--NANDUSH.S
QC INSPECTOR
MKG GLOBAL LLC
DUQM REFINERY PROJECT-OMAN
MOBILE:968-79614049
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/e36293e0-a596-4488-a2b9-4c4ee5c3c2c4n%40googlegroups.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CACc1tDLSp-VpLOXMyPsgPwag23SXv3qJuNUNo5mwU7qRDgvBKw%40mail.gmail.com.
No comments:
Post a Comment