Re: [MW:31671] SUPPORT WELDING BY A PIPE WELDER

Yes he can weld by smaw process, without changing other essential variables. 

Regards, 

Manikandan. 

On Sun, 1 Nov, 2020, 4:07 PM NIKHIL THOMAS JOY, <nikhil.thomasjoy@gmail.com> wrote:

Dear Experts,

Greetings of the day,

If I qualified a welder in pipe 6"NPS material C.S (A106 Gr. B) with welding process GTAW+SMAW as per ASME SEC IX.

Can he weld the pipe support(Shoe ,Guide , trunnion support) of SMAW only & structural connections such as Gusset plate, bottom plate, bracings of material  A36  by using SMAW Process.

 

Experts please give answer.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/bf0a7f55-b41a-469f-b9aa-577f730f7c63n%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPdGVmPbtWDQTGQc8d77xnRvtsuqp2TZ%3DH2Dah3aW3guacXu5g%40mail.gmail.com.