Welds shall not form a cross. There is a rule for staggering, 4 times the thickness of I am not wrong
Στις Πέμ, 22 Οκτ 2020, 07:35 ο χρήστης Rajeev Shukla <gkpshuklaji@gmail.com> έγραψε:
SirI need to under stand the meaning of this line , and which code I should refer for Compressor received welding.Longitudinal seam in adjacent sections shall not be in same line.--On Saturday, 21 April 2018 at 11:57:35 UTC+5:30 joykol...@gmail.com wrote:Dear Expert,Please suggest Dia range.for WPS as per API 1104.--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/c23d7c90-1f2b-4a58-ab4d-651cbde1c374n%40googlegroups.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPOi40AUSyNOytd3G3wt6rW_ypD4_iWzRnhf7Vx08aX9ri0%2BOg%40mail.gmail.com.
No comments:
Post a Comment