--Dear Shahil,
In order to help you identify the problem, please report the following:
1. For the Charpy impact test, was the UG-84 ASME VIII-1 instructions followed?
2. What were the values of the impact test in ft-lb?
3. What was the test temperature?
4. Is the WPS qualified with the supplemental Charpy impact test?
5. Regarding the sample: is the surface flat and does it appear shiny?
6. What welding process was used to make this pressure vessel?
7. The base material was selectionated as SA-516 Gr.70N?
Regards,
Ramon Briceno
www.linkedin.com/in/ramonbriceno-metallurgicalengineer
Sent from Mail for Windows 10
From: Shahil Saini
Sent: Tuesday, November 10, 2020 8:00 AM
To: materials-welding@googlegroups.com
Subject: [MW:31726] Imapct toughness testing on weld joint of material SA 516 Gr70
Hello everyone,
Can anyone help me in finding out problems arising during impact toughness testing of the weld joint of the pressure vessel.
Thank you,
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALfBO_8XbVQ6LfbHMXd4ymttDJ2ouSfT8jAn9GG0x_Q6uevnng%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/BL0PR11MB34260D55FC7C3EA4BEBE5960AAE90%40BL0PR11MB3426.namprd11.prod.outlook.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALfBO_9ewS8-JPkjp9U%2Bk-2gJQ8kGCVSu1%3Df0Zj9_P0-Gi1z_w%40mail.gmail.com.
Comments