[MW:31717] Re: WPS and PQR According to ASME Sec.IX and Sec.VIII- Boiler and Pressure Vessel Code

I think it may ok. Next to follow variable in QW-250.

Same filling data and format at here.

On Saturday, October 24, 2020 at 11:59:35 AM UTC+7 K K wrote:

Dear Experts,

Please refer below WPS and PQR details.

PQR Details - Base Metal - ASTM A106 Gr.B  To ASTM A106 Gr.B. ( P No - 1 Gr.No - 1 To  P No - 1 Gr.No - 1 ).

Process - GTAW  + SMAW ( GTAW - 4.8 mm + SMAW - 13.46 mm)

Thickness of the Coupon -18.26 mm, Dia - 6"

With PWHT - 638°C ,time 72 min.

No Impact tested.

DESIGN TEMP. / MDMT (°C) -290 / 5 .

WPS Details - Base Metal - ASTM A106 / A516 Gr.B / Gr.70  To  ASTM A106 / A516 Gr.B / Gr.70 . ( P No - 1 Gr.No - 1/2 To  P No - 1 Gr.No - 1/2 ).

Process - GTAW  + SMAW ( GTAW - 9.6 mm + SMAW - 15.4 mm).

SFA No- GTAW - 5.18 and for SMAW - 5.1.

AWS No - GTAW - ER70S-3 and SMAW - E7018-1H4R.

Pre heat - less than 12.7 mm -10°C and less than 25 mm 75°C.

Inter pass Temp. -315°C.

PWHT - 620°C, Holding time 1 hr thk +1 hour min.

According to above details help me to review, as per ASME Section VIII for Boiler and Pressure Vessel Code.

And I need your suggestion what are the essentials requirements according ASME  Sec.VIII. And what are the important things i have to check.

Please suggested me with clause reference.

Please send me your valuable suggestions, it's Supports me lot.

Thanks and Regards

Kiran

 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/65cdb68e-dee7-4848-854d-c1d0ad645908n%40googlegroups.com.