Re: [MW:31680] A106 GR B to A335 P11 Dissimilar welding

If you Code of construction is either Asme viii-1, I, 31.1, 31.3 for this thickness the answer is NO

Στις Κυρ, 1 Νοε 2020, 12:37 ο χρήστης 'Raja kumarasamy' via Materials & Welding <materials-welding@googlegroups.com> έγραψε:

Dear allr,




                      My project we have A106 GR B to A335 P11 Dissimilar welding ,Can any on suggest the PWHT and  it's required?


t-      8.74mm
Dia:  2''












Regards

 Raja kumarasamy
Multi Discipline Inspector (TPI)
ADNOC Waste Heat Recovery
ProjectRuwais, AbudhabiUAE 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1730221556.684444.1604222570928%40mail.yahoo.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPOi40AtM75vLhCqRSFMwXpgi5esNtM42Kezo4V8TKMTwTsBug%40mail.gmail.com.