Did the engineer that audited the WPS/PQR reference QW-403.5? I did not notice any reference per ASME IX anywhere in his email. Perhaps you can upload the WPS/PQR in question, so that we can see exactly what is going on.
Cheers....
On Sun, Nov 1, 2020 at 2:37 AM Manish Kumar <mkmkr431@gmail.com> wrote:
Dear Sir,Material specifications for SA 302( P number=3 & Group number 3) & SA 508 (P number=3,Group number =3 & Impact value is also required) has been given in WPS.Its PQR is made from material 1 SA 302 (P=3,Group number=3) to material 2 (P =3,Group=3) impact test also given in PQR.In this case as per ASME SECTION IX 403.5Is WPS relevant from PQR.Please advise on this issue.Enclo.WPS & PQRRegards--Manish Kumar
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHfQ4k4apnNghy-Ax-eZhPtpRN9wi5sf%2Bdr%3DKM11TgjZLxHrZw%40mail.gmail.com.
Regards,
Jamie Reyes
J.R. Machine Company, Inc.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJNUtUM0tW9g5jpOKdKEXrJpO7h%2BsvCzpR0ugY_uBc6D89Y6Hw%40mail.gmail.com.
No comments:
Post a Comment