Re: [MW:31671] Allowable tolerance

Ref ASME sec2, Part A, SA450

On Sun, Nov 1, 2020, 4:06 PM Vinay Thattey <vinay.thattey@gmail.com> wrote:

In general it is 12.5 %

On Sat, 31 Oct 2020 at 19:39, Dhaneesh p <dhaneeshdotp@gmail.com> wrote:

Dear experts 

my query is , what is allowable tolerance in length , diameter , thickness for material receiving inspection of following ( please mention reference code   )

1) pipe ASTM 312 TP 304  , SIZE 3/4" , THK : 2.87 mm , Length : 6 m 

2) fittings  ASTM A 403 WP 304 , THK : 3.38

Regards 

Dhaneesh 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/bda38b20-5a5b-4094-9d28-2b8a410fa53cn%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CA%2BQ29OjbXQXvXQ%2BpiDGosTTNSuJa0qpp7-Xx%3DYyGJMLboQNBDA%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eOPYHtv3U%3Dsr-HFe5Z%3DFyezQqYy4Rsm62snpt8eGKRmNg%40mail.gmail.com.