what is ref std pl
THANKS & BEST REGARDS,
KG.PANDITHAN, BE, IWE, AWS-CWI, CSWIP 3.1,
CONSULTANT-WELDING & QUALITY
Mobile no: +919940739349
On Mon, May 28, 2018 at 10:27 PM, chandrakant mohikar <crmohikar@gmail.com> wrote:
Dent (buckling and or upheavel ) in piping shall be <2 %. In addition NDT shall be carried at dent location has to be as per requirement to ensure fitness of piping or RBI (Risk based inspection)Chandrakant MohikarEx. PDO / Co. Site Representative (Project QA)8446079514--On Mon, 28 May 2018, 4:10 p.m. Anoj Singh, <nayaktp@gmail.com> wrote:What is permissible dent on 10" sch. Std. Carbon steel seamless pipe?--RegardsAnoj singh
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
Visit this group at https://groups.google.com/group/materials-welding .
For more options, visit https://groups.google.com/d/optout .
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
Visit this group at https://groups.google.com/group/materials-welding .
For more options, visit https://groups.google.com/d/optout .
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment