Re: [MW:27795] PT required or not during bevel preparation on t 23 tube

It is better to ensure the defect free preparation

On Mon, 7 May 2018 4:15 pm Rameez khan RK, <rk.rameezkhan21@gmail.com> wrote:

Dear Experts ,

                       can any one please tell me regarding PT required or not during bevel preparation on T 23 tube material during repair. Please give me according standers and code. whats is the possibility for PT on Tubes after repair

Thanks & Regard



Rameez Ali Khan
Mechanical QC Inspector
Mobil: +966582963466

SEPCOIII ELECTRIC POWER CONSTRUCTION CORPORATION

Yanbu Power & Desalination Plant Phase 3, K.S.A  

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.