--Dear Sir,The tubes are centrifugally cast and chemical composition is below.Grade G 4852 Micro(25Cr 35Ni Nb)C 0.45,Si 0.7,Mn 1.5Cr25, Ni 35,Nb1P 0.03,S0.03,W0.6,Ti,0.3,Pb 0.01,Sn,0.01,Zn,0.01Regards,Asif ShahzadOn Sunday, May 06, 2018 06:38:15 PM, PGoswami <pgoswami@quickclic.net> wrote:
Thanks.
P.Goswami.P.Eng, IWE.
Welding & Metallurgical Specialist
Linkedin: https://www.linkedin.com/in/pradip-goswami-2999855/
From: 'Asif Shahzad' via Materials & Welding [mailto:materials-welding@googlegroups.com]
Sent: May 6, 2018 4:41 AM
To: Materials & Welding <materials-welding@googlegroups.com>
Subject: [MW:27787] Welding oF dissimilar metal at High temperature(Micro Alloy+P11)
Dear Expert,
We want to weld Micro alloy (Ni,Cr) furnce tubes with the P11reducer in the Steam methane reformer that will be operator at 850 to 900 C temperature.
Please provide your opinion about welding reliability of these two dissimilar metal at high teperature.
Regards,
Asif Shahzad
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment