Re: [MW:27911] Dish end heat treatment.

Can you provide me any code reference pl.

On Sun, May 27, 2018 at 8:15 PM, Nithin Joseph <nithindsilva4u@gmail.com> wrote:

Yes

On Sun, May 27, 2018 at 5:07 AM, chiluka venkatramulu <ramuluchiluka@gmail.com> wrote:

Dear All,

Can we do stress releaving of 14mm thick Dish ends after forming at 610 Deg Centigrade? One of our nedor did so. Can we accept it. Material is SA 516 Gr 70.

Regards,

Venkatramulu

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--

Regards,
Dsilva

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.