Mr. Prasad, Thanks for your feedback and appreciate your efforts, but my doubts is this table 4.6, SL no 7, increase of more than 56°C in preheat and interpass from qualified, required requalification. To my remember it is there since 2004 edition till 2017. If it is only for Interpass, why they haven't changed at least in 2017 edition.
On Thu, 24 May 2018 11:53 am MW, <raghurambathula@gmail.com> wrote:
Dear Prasad--Appreciate your feed back on the solution.Dear members
Follow up with a brief note on the solution (The Most Important) is always recommended for the benefit of others.
Send a note after the problem has been solved to all who helped you; let them know how it came out and thank them again for their help. If the problem attracted general interest, it's appropriate to post the follow-up here.
On Thursday, 24 May 2018 09:19:08 UTC+4, N V PRASAD wrote:Dear All,It was good debate and the explanations were awesome. Our team from US, has discussed with AWS Committee member and it was clarified that the increase is applicable for Inter pass temperature only.RegardsPrasad
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment