Re: [MW:27465] Impact test failure ( pipe to Flange )

Dear Yokesh,

I presume you were qualified a PQR for Pipe to pipe (X65 to X65) welding most likely with same electrode combination(if not, please specify). what happened to that PQR? is it pass the impact toughness? what about those impact values? if you compare these 2 scenarios(pipe to pipe and pipe to flange), you may get some conclusions. Please share if so.

Thanks in advance

Abdul Muneer 

Welding Engineer 

Dynamic Industries Saudi Arabia

+966550216718 (KSA)

+919895480850 (IND)

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.