Saturday, March 3, 2018

[MW:27437] How to select welding consumable .

Hi to everyone !!
i wanna to know how to select welding consumable for diff p no base metal.i have to take refference from asme sec 9 and asme sec 2A,2B,2c.
■ first i hv to select welding process.

■ i know that tensile strength of consumable i am selecting is to more than base metal.
■ what is the limit for deviation in tensile strength how much +- limit are allow suppose base metal have 60 ksi tensile stregth can i take consumable of 20 ksi or 120 ksi tensile strentgh consumable.
■ how to take deviation in chemical composition .
What is the main key i have to take por prepare any wps in world. I m facing problem in creating wps.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...