no, u may use 317 which is readily available in the market
THANKS & BEST REGARDS,
KG.PANDITHAN, IWE, AWS-CWI, CSWIP 3.1,
CONSULTANT-WELDING & QUALITY
On Sat, Apr 23, 2016 at 12:40 AM, rajesh s. mhaske ,Engineer Welding ,PUNE,INDIA <rajesh.mhaske17@gmail.com> wrote:
Dear sir,
Thank you very much for your reply.ER320 LR is not available in our area so can i use ERNiCr-3 for welding of alloy 20 ?
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/d7b04f3b-f29e-4218-b302-3b1850f90e38%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eO-fSbeuEmKushmvMUntNUho_VV%3DjJHR2Nz1o%2BKs9S17w%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment