Re: [MW:24643] Procedure Qualification thickness limit range clarification as per ASME SEC.IX

Kindly refer QW 403.3

On 7 Apr 2016 08:18, "MOHAMMAD IMRAN KHAN" <mdimran.khan01@gmail.com> wrote:

Dear Sir,

We would like to know that, Our PQR Base Metal (SA 516 GR.70) thickness is 70mm with Impact, or PWHT.

What is the minimum or maximum base metal thickness range qualified.

As per ASME SEC.IX QW 451 Procedure Qualification thickness limit mentioned in Table QW.451.1 given.

5 to 200 mm.

But our Clinet approved WPS  in mentioned 16 to 200mm. Where mentioned ASME SEC.IX reference is mentioned range of base metal thickness.

Please clarify base metal thickness range 16 to 200mm.

With Best regards,

Mohammad Imran Khan

QA/QC Engineer

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAC_iqqAR2WuxK2aVs0_9OdBVyoyQU6haivR%3Dz4aZKK%2BEFng_KQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADAKtxmL5kE-W6Onxc1akRHw1PjoHqc9kbyTXm-9ed0kCTVftg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.