Re: [MW:24679] VACUUM receiver operational / pressure test. (vacumm receiver pressure test)

I think it's not required to to carry out any of them unless it was in service and subject to major repairs 

Sent from Yahoo Mail on Android

On Tue, Apr 12, 2016 at 4:33 PM, Mohammed Ghani

<ghani386@gmail.com> wrote:

Dear Expert,

I need to inspect vacuum receiver which is operating at 450 MMHG / -0.599 Bars.

Please let me know at what pressure do i need to carry out Hydrolic / Pressure / vacuum test.

Kindly do needful.

--

Thanks and Regards, ?

Mohammed Ghani,

CSWIP 3.1 / BGAS L-2 / ISO 9001:2008 QMS LA.

Mechanical Inspector,

BUREAU VERITAS.

ü Please consider the environment before printing this email.

 "Be the change you wish to see in the world"

---Mahatma Gandhi---

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAG7AWVjtCr2h4b9%3D%3D-EiSpBeCPHdqw2qPgfwbnBCpe93aL_Nwg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/406047347.1704006.1460471361006.JavaMail.yahoo%40mail.yahoo.com.
For more options, visit https://groups.google.com/d/optout.