Saturday, April 9, 2016

[MW:24658] High YS to Low YS


Good day all 
Please help me out by providing u r advise on below request. 

We have a qualified WPS with 75K YS material as per Sec-IX, can we use on material with 65K YS for welding? 

Please provide your feed back with reference clause. 

Thanks and Regards 
Munden


Sent from my Samsung device
By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

[MW:35502] SAW WELDING

Dear Expert  what are the minimum thickness can qualify SAW welding .8mm thick plate  possible to weld  ( GTAW -4mm & SAW 4 mm )  We cho...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...