Tuesday, April 12, 2016

[MW:24668] simulated PWHT on HIC sample

Dear Expert
Good Day!!!

There is a 100 mm thick plate A516-Gr 70N in sour service which shall be HIC tested, laboratory told us that the test sample shall be heat treated in a simulated PWHT condition for the equipment other wise test result will be failed, meanwhile there is no specific requierment in NACE in this regard. I am looking for a reference to satisfy my client.
Appreciate if you can share your valuable ideas regarding this issue.

Regards,
H.Nikdin  
By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

[MW:35614] Re: SS FILLER

dear , pl check A number and Gas composition use for ss cant be sutibale same % for duplex., u need to qualified with aditional testing of f...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...