Wednesday, April 20, 2016

[MW:24723] welding filler metal for SS321

Dear Experts

Refer to API582 table A-2 proposed filer to weld SS321 to SS321 is E347-XX/ER-347 but some manufacturers such as ESAB propose E/ER-308LSi to this base material (SS321 to SS321) operating temperature is +350 C,
would you please advise in this issue.

Regards,
H.Nikdin
By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:35507] WPS for Furnace PWHT

As per ASME B31.3, Clause 331.1.6 (b): Any required PWHT shall be carried out in accordance with the qualified WPS. For furnace PWHT inv...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...