Re: [MW:23134] cladding of spherical surfaces by stellite

Dear sir,
         please give the dimension of the ball valve size.

On Apr 20, 2015 9:12 AM, "Himan Nikdin" <himan.nikdin@outlook.com> wrote:

Dear Experts;

My ball valve vendor claims that "it is not recommended to clad ball part of ball valve by stellite", I am looking for a reference to find is there any specific  limitation for this material.

The ball material is "SS316L".

If yes, is this limitation applicable for other stainless steel material like "13%Cr".

Thanks

Himan Nikdin

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/BLU180-W672B8F468DF26C214D739A9EE10%40phx.gbl.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADCvV-UYKpZd-U2bNL%2BPWHf-St5c-Am4eQefabvaLQboHEGiaQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.