Re: [MW:23075] Magnetization of A 335 P11/P12 during grinding process

Dear Mr. B Osare,

Can you please provide me the value magnetism strength.

The solution depends upon that value.

Use Gauss meter for checking & check the direction of magnetism.

On Tue, Apr 7, 2015 at 12:36 PM, B Osare <bosare@nfl.co.in> wrote:

Dear Experts,

 

We have observed that piping material  A 335  P11 & P12 of Super heater Header Tee size 12"& 18" (Thickness 45.00 mm & 65.00 mm respectively)  was magnetized during grinding process at Location (not in workshop).   Can anyone tell us how this phenomenon occurs and how it can be de-magnetize at job location? The weld material is getting cracked after welding. Please suggest the  welding procedure with suitable welding electrodes & what precautions  to be taken during welding.

 

 

Regards

 

B Osare

From National Fertilizers Limited, Vijaipur

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CE2FEBA545354C0C93B2B0585FD87FE4%40mechworkshop.
For more options, visit https://groups.google.com/d/optout.

--

Thanks & Regards
Biplab Pal
Welding Inspector

E-mail:   biplab.mech@gmail.com
 
Information in this email and any attachments is confidential and intended solely for the use of the individual(s) to whom it is addressed or otherwise directed. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the Company. Finally, the recipient should check this email and any attachments for the presence of viruses. Myself accepts no liability for any damage caused by any virus transmitted by this email.
 

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAFnzQg2XA7k3ZHNxTkT7fG7LB5n3b%2BDCbgig%3Dn1uVZvYdJ%3DBhQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.