[MW:23138] How to operate eccentricity testing machine

Dear experts,

I had a problem while testing SS electrodes on Non-magnetic eccentricity machine, when placing electrode into the sensing probes it shows the needle deflection of 20 divisions on both sides which indicates non ecentricity and probably tapered burning will arise when welding it, but when actually welding that electrode it does not show any sign of Tapered burnin.
Would be thankful if someone could explain me why this is happening and how to fix it,

Regards
Arslan Ahmed





--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1f4aaefc-7424-481f-beaa-6d9bbf1113ba%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.