Re: [MW:22924] Weld Symbol Description

Hi,

 

the detail of the weld symbol is that as follows.

1. the root gap of the first bevel joint is 2mm.

2. the Bevel angle should be 45 deg.

3. the bevel groove weld depth is 8mm.

4. after groove weld, fillet weld of leg length 5mm to be welded.

 

Thanks,

 

M. Sivachidambaram

QHSE Engineer

On Wed, Feb 18, 2015 at 8:57 PM, Nazrulla Khan <nazrulla33@gmail.com> wrote:

Gents,

Can any one explain the attached image weld symbol explanation.

1.      8
2.      7
3.      2

4.     45deg

Thanks & Regards

Nazrulla.JK

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPVF%2B2PUK7BF1zNpYvf_5bDKPS7F4z-iPVtem07Lj126t5CcsA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPJQpMVwJrUzDVK4zMj%2BQRq98jQV7KOktHSYaKDaw5JAkXBXqw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.