Re: [MW:22994] Re: Requalification is required for changing of process

With or without backing as it is not essential variable for wps

On 21-Mar-2015 4:28 pm, "NISARG KEDAR" <nisarg.tuv@gmail.com> wrote:

yes, you can rewrite & make another WPS without re-qualification. only essential parameters should not change.

On Saturday, March 21, 2015 at 9:21:46 AM UTC+5:30, srinivas wrote:

Dear all,

Please help me for following situation:

Approved WPS - GTAW+SMAW (Qualified for pipe) - Material -P11 (SA 335) , Thk - 19mm  PWHT - Req.

1. Now can revise above said process for only SMAW without re-qualification with back gouging for plates. ( Butt  Welds)

2. And also fillet welds same thing can do.

Regards,

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/58a4a383-2167-4d39-b5ed-2a73723044b7%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4ePfcy0mkAF-KOK04e%3DK%3DPz84jarbC%3DEKXDXCdwn3yWiqg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.