what method was used for joint preparation? gas cutting, grinding , machining ? what is the thk of joint.? can you take a photo of cracked joint and send. my mail id : vanchinaths @gmail.com
On Mon, Mar 30, 2015 at 12:30 PM, RK <krishna.4969@gmail.com> wrote:
--Hi..We have used Dillimax 690PE material for our penstocks under construction.Experienced delayed cracking in welds (after a month or so) in all most all the welds...in all 3 welding processes used SAW, SMAW, FCAW...cracks are only in the welds!!!Process is PH 100-150 DegC, Interpass 200 Deg C and DHT 200-250 DegC for 3 hrs.Can anyone have any idea what could be the reasons?? we are in soup...and not able to proceed further..rgds
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/71e1545b-e44d-4786-9afe-6e6d53a90504%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CA%2B6Tn1JH74Nk8OHjeNrxXqWLS%2BMaGmkwvxq3Z-ijdX1QUmyjHQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment