Monday, September 2, 2013

RE: [MW:18561] Flane with build up ang spatter

Recommendation is to remove all weld spatter and redo the serration by machining to BS EN 1092 standards.


-----Original Message-----
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Mervin
Sent: Monday, September 02, 2013 6:28 AM
To: materials-welding@googlegroups.com
Subject: [MW:18557] Flane with build up ang spatter

Dear expert

Can you please help me what we will do to this 4" flange. Flange serration it was damage due to buil-up and sppatter client did not accept this. And which standard is the refference for this.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

No comments:

[MW:35346] Cast-iron welding

Any advice for cast iron welding Sent from Yahoo Mail for iPhone