Re: [MW:14861] Maximum Spin Hole Diameter for Dish End

first of all tell me haw ur dia bcm more than 60


On 7/13/12, Swapnil Vanjara <swapnil.vanjara@gmail.com> wrote:
> first of all tell me haw ur dia bcm more than 60
>
>
> On 7/13/12, sevak hiren <hirensevak80@gmail.com> wrote:
>> Dear Experts,
>>
>> As per ASME section VIII Div I , UW-34, max. allowable patch diameter for
>> a
>> spin hole of dishend is 60 mm.
>>
>> If, the dish end spin hole patch diameter is found to be of more than 60
>> mm
>> then the dish end should be rejected, please correct me if I am wrong.
>>
>>
>> Thanks in advance.................
>>
>> --
>> To post to this group, send email to materials-welding@googlegroups.com
>> To unsubscribe from this group, send email to
>> materials-welding+unsubscribe@googlegroups.com
>> For more options, visit this group's bolg at
>> http://materials-welding.blogspot.com/
>> The views expressed/exchnaged in this group are members personel views
>> and
>> meant for educational purposes only, Users must take their own decisions
>> w.r.t. applicable code/standard/contract documents.
>>
>

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.