Hi! Your PQR should be with extended Time covering total PWHT time incurred on Job( Regards Hegde
--- On Sun, 3/6/12, Sikhandar Ummer <sikhandarummer@gmail.com> wrote:
From: Sikhandar Ummer <sikhandarummer@gmail.com>
Subject: [MW:14453] 2 cycle or 3 cycle PWHT
To: "Materials & Welding" <materials-welding@googlegroups.com>
Date: Sunday, 3 June, 2012, 12:35 PM
Let me know about after PWHT we need something weld on the plate do again PWHT then what is the requirement ? How we will perform 2 cycle PWHT complete 2 cycle 2 time expose? or exceed holding time? BR, Sikhandar Ummer -- To post to this group, send email to materials-welding@googlegroups.comTo unsubscribe from this group, send email to materials-welding+ unsubscribe@googlegroups.comFor more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment