Tuesday, October 26, 2010

Re: [MW:7832] Bevel angle

Is 37.5 DEG is bevel angle,rest depend upon project specification.

On Tue, Oct 26, 2010 at 1:57 PM, Sadique Sheikh <sadiq.mech@gmail.com> wrote:
Dear All,
In piping different bevel angels are used like 37.5, 32.5 etc.
What are the criteria to decide bevel angle in piping?
Does it depend upon wall thickness and pressure of piping?

Thanks & Regards,
Mohd. Sadique Sheikh
BUREAU VERITAS

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:27053] Required electrode for A335 P11 # S316 material

Is it advisable to weld Austenetic SS filler over Nickel base weldments? THANKS & BEST REGARDS, KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1, ...