As per code section 1 , under repair of defects, PW 40.3.4.d, pl refer for SMAW ( 4xcore dia),also given in code section 8, for GTAW general engineering practice-width shall not be more than 10mm
kgp
On Sat, Oct 16, 2010 at 6:32 PM, limesh M <limesh78@gmail.com> wrote:
--Dear All,I heard about weaving ,which is applicable in SMAW.If I am crossing the weaving barrier as per manufacturer recommendation,ie, 2.5 X dia of electrode or 3 X dia of electrode what would happen?Is weaving applicable in GTAW? If applicable what would be the weaving range?Regards,Limesh
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment