Dear Girish,--As per ASME you have to take CVN from Weld center line, HAZ. Refer ASME Sec 8 Div2 for CVN requirements. There u have the locations, energy requirements,etc.
2010/10/3 Shadab Alam Ansari <shadabansarialam@gmail.com>
--Dear Girish,
In which position the welding was done?
Regards
Shadab Alam Ansari
Welding Engineer
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of giraish real
Sent: Saturday, October 02, 2010 4:54 PM
To: materials-welding@googlegroups.com
Subject: [MW:7319] Test piece from pipe...
Dear all
I want to Qualify a PQR in pipe Material LTCS-A333Gr6.Pipe Dia is 8".
now my Question is for Destructive test (IMPACT) ,from which location I have to cut?
please give ASME reference also.
Girish K. Vora09978910870
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
regards,Harish.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment