CASE 1 is applicable for SAW/GMAW/FCAW
For SMAW : To a value not recommended by manufacturer
G.S.Arora
B4-103 LaHabitat Opp Marutinandan Villa
Near Aayna Shopping Complex Off SG Road Thaltej
AHMEDABAD-380054
Ph: 91-9725262404
--- On Wed, 25/8/10, ayys4u <ayys4u@gmail.com> wrote:
From: ayys4u <ayys4u@gmail.com>
Subject: [MW:6707] Reg Range of Amperage in WPS
To: "Materials & Welding" <materials-welding@googlegroups.com>
Date: Wednesday, 25 August, 2010, 7:04 PM
Dear All, Can any one help me! PQR Qualified with an amperage of min 350 and max 550. As per AWS D1.1, Allowable Variation in Amperage for WPS is 10 %. How should i consider this 10%. Case 1 Should i Consider lesser 10 % lesser to PQR's Min Amperage and Greater side 10 % to the max PQR Amperage. Case 2 Or Should i consider 10% min max of Average of PQR Value. Which case is correct? -- To post to this group, send email to materials-welding@googlegroups.comTo unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.comFor more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment