Aly :
I have done it before,and it just working fine. It is true that there are small amount of melting zinc will fill the gaps between serration but per my past experience there are still enough roughness to hold the gasket.
I did it on 2 ", 4 " and 6 " flanges for your info.
Regards
Richard Bonardo
QA/QC Engineer
PHE-ONWJ
From: Aly <mhaskar.aly@gmail.com>
To: materials-welding@googlegroups.com
Sent: Tue, 24 August, 2010 1:03:42 AM
Subject: Re: [MW:0] How to protect Serration of Flanges during Hot dip galvanization
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
I have done it before,and it just working fine. It is true that there are small amount of melting zinc will fill the gaps between serration but per my past experience there are still enough roughness to hold the gasket.
I did it on 2 ", 4 " and 6 " flanges for your info.
Regards
Richard Bonardo
QA/QC Engineer
PHE-ONWJ
From: Aly <mhaskar.aly@gmail.com>
To: materials-welding@googlegroups.com
Sent: Tue, 24 August, 2010 1:03:42 AM
Subject: Re: [MW:0] How to protect Serration of Flanges during Hot dip galvanization
| The Galvanization temperature is 450 Deg C . -------Original Message------- From: santosh bhandary Date: 23/08/2010 14:04:22 Subject: Re: [MW:6656] How to protect Serration of Flanges during Hot dip galvanization
-- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents. |
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment