[MW:6687] Re: RT report for coded vessel

Is the vessel designated for lethal service, or identiied as full RT
(RT1) on the nameplate if not the AI does not have to even verify if
the NDE was performed on the nozzle. As stated in the previous post
the AI only has to verify that the required NDE is performed.

On Aug 24, 12:39 pm, george.dilin...@gr.bureauveritas.com wrote:
> In no case the AI has to stamp any NDE report.
> According to UG-90 (c)(1)(i) he has to verify that required NDE has been
> performed and that results are acceptable. Evidence for this verification
> could be signing of the RT reports by the A.I
>
> Dr. G. Dilintas - Authorized Inspector Supervisor
> I&F Regional Technical Manager
> Bureau Veritas Piraeus - Greece
> Tel: +30 210 40 63 113/4
> Fax: +30 210 40 63 118
> Cell: +30 69 44 64 62 04
>
>              skrie85                                                      
>              <skri...@yahoo.co                                            
>              m>                                                         To
>              Sent by:                  materials-welding@googlegroups.com  
>              materials-welding                                          cc
>              @googlegroups.com                                            
>                                                                    Subject
>                                        [MW:6677] RT report for coded      
>              24/08/2010 10:48          vessel                              
>                                                                        Ref
>
>              Please respond to                                            
>              materials-welding                                            
>              @googlegroups.com                                            
>
> For CODED vessel (U-Stamp), does the RT film and RT report for nozzle less
> than 10" no need A.I to review or sign?
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding-unsubscribe@googlegroups.com
> For more options, visit this group's bolg athttp://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>
>  graycol.gif
> < 1KViewDownload
>
>  pic14684.gif
> 1KViewDownload
>
>  ecblank.gif
> < 1KViewDownload

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.