Skip to main content

Re: [MW:4039] Impact

By Materials & Welding
Dear Amarjit Singh .

There was a typing error 

Please read my reply as "E 7018 C3 L electrode is OK. You will get impact property with this electrode & with out PWHT also.  I have done a procedure with this elcetrode & without PWHT,  ,  impact test at -54 deg. C.

sorry for the inconvenience caused.

Thanks & Best Regards.

John.


On Wed, Jan 13, 2010 at 8:08 AM, John Manoj <manojacgnr@gmail.com> wrote:
Dear Mr. Amarjit singh,

E 7018 C3 L electrode is OK. You will get impact propery with this electrode with out PWHT also.  I have done a procedure with this elcetrode and without impact test at -54 deg. C.

Thanks & Best Regards.

John.


On Tue, Jan 12, 2010 at 8:48 PM, amarjit Singh <amritas2001@gmail.com> wrote:
Dear all,
 
I am facing the problem of impact test at -60 deg C in welding.
 
The material is SA 537 Cl 1 and welding consumable used is E7018 C1L ( Advani make). as C1L contain Ni its weld should pass impact but the same is not.  where as impact is OK with E-7018 C3L electrodes.
 
can any body suggest ????

--
Amarjit Singh

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.



Comments

Post a Comment

Popular posts from this blog

Materails FAQs

By Materials & Welding
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...
21 comments
Read more

[MW:30043] Weep hole

By Materials & Welding
If weep hole is not provided in dummy pipe before welding What will happen??? -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/da251ee6-fa7f-4851-b876-cdb3834ae341%40googlegroups.com .
Post a Comment
Read more

[MW:36169] Cold Bending Qualification

By Materials & Welding
Dear Experts,  Can anyone share the inspection requirements or a qualification procedure for cold bending? Our client spec states only the requirements for induction bending and would like to know your opinion on the cold bend inspection requirements. The code of construction is B31.3, Max. 5D bends, A106 SS 316L.  Thanks in Advance. -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion visit https://groups.google.com/d/msgid/materials-welding/1be61cc3-e9c9-4a5f-834d-e8485e248432n%40googlegroups.com .
Post a Comment
Read more