Friday, January 15, 2010

[MW:4043] Transition (pup pipes) testing requirments

Pipelines are subject to the rigours of fracture control e.g. ductile
fracture via impact energy absorption and brittle fracture via shear
area fracture appearance. This is often done by CVN and DWT.

Should pup pieces made up from API 5L xx linepipe be subjected to the
same tests? Or should they by tested only via impact energy absorption
as are the fittings to which they are attached.

PJ

By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:35354] Cast-iron welding

1. Preheat joint area(other area, cover with mineral wool). 2. ENiCi or ENiFe-CI. 3. stringer bead. 4. peening is to be done on weldmetal im...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...