Dear Sir,
When you have a project where it is required to have WPS regarding EN-ISO 15609 (BS-EN 288 is withdrawn) you should have a PQR qualified according to EN-ISO 15614-1 for Steel and Nikkel base alloys.
When your project specification still mentions BS-EN 288 you should have a PQR qualified according to BS-EN 288-3.
It is not allowed to use ASME IX PQR’s for drawing up EN-ISO WPS documentation.
Met vriendelijke groeten / Best Regards,
Herman Pieper
QA-QC Inspector / IWI-C / IWT / Materials expert
Job van der Havestraat 6
8384 DB, Wilhelminaoord
Tel: 06-51691215
Van: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] Namens Shanmuganathan Subbiah
Verzonden: zondag 11 november 2012 6:55
Aan: materials-welding@googlegroups.com
Onderwerp: [MW:15902] is possible qualifed asme sec ix wps can change to bs 288-3 format
Dear experts,
i have one PQR which one was qualified as per asme sec ix, now i want to prepare wps as bs288 format by use of qulified PQR.
is it possible?
--
Regards
SHANMUGANATHAN SUBBIAH
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment