Wednesday, September 22, 2010

Re: [MW:7134] 7010 for root pass

Hi Aftab,
 
If you are asking about pipeline welding, then for X60 material E 7010-P1 is the suitable consumable for Root through Cap welding with good mechanical properties. But welding with E6010 for root welding is easier than E7010 (especially for welders).
 
If you require further deatils & trouble shooting and welding techniques for pipe line welding, please find attached catalog for your reference.
 
Cheers!
 
Rajasekhar.

On Tue, Sep 21, 2010 at 1:21 PM, Ahmad, Aftab <Aftab.Ahmad@omv.com> wrote:

Gents,

 

Although 7010 & 6010 is good choice for welding X60 but what to do if root bend does not qualify. What about to have root, hot pass, fill and cap with 7010? Please comment.

 

Best Wishes

Aftab Ahmad

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...